Betongprodukter:
ARC CS4
Mineral-Reinforced Severe Chemical Resistant Concrete Coating
100% solids, highly chemical resistant and wear resistant, low viscosity, thin film 100% Novolac epoxy. ARC CS4 industrial coating is a concrete overlayment designed to:
- Protect new and old concrete subject to severe chemical attack
- Replace acid resistant tiles, chemical resistant paints and other concrete coatings
- Apply by roller, brush, squeegee or airless or heated plural component spray
ARC CS2
General Purpose Thin-Film Epoxy Coating
100% solids, mineral reinforced, wear resistant, low viscosity epoxy.
ARC CS2 thin film industrial coating is designed to:
- Protect new and old concrete subject to mild chemical and/or physical damage
- Replace tiles, outlast paints and other concrete coatings
- Apply by roller, brush, squeegee, or airless/heated plural component spray
Chesterton 415(E) Concrete Sealer
Tough polymer coating that seals, protects and beautifies old and new concrete, brick, rock, wood, and metal.
Availability: EMEA Only
ARC 791
High-build Concrete Resurfacer Coating
100% solids, high-build, quartz (SiO2) reinforced, highly chemically resistant, modified epoxy coating that can bond to damp concrete.
ARC 791 industrial coating is designed to:
- Resurface concrete damaged by chemical attack or mechanical stress
- Replace acid resistant tiles, epoxy mortars, fiberglass, and conventional overlayments
- Bond to damp concrete, making substrate impermeable for aggressive chemicals
- Apply to vertical substrates at nominal dft of 6 mm (240 mils) using ARC 797 primer
- Easily apply by trowel
ARC NVE
Three-Layers of Protection
Three-layer system, high performance, quartz reinforced, novolac vinylester lining for concrete applications requiring extreme chemical resistance and moderate abrasion and impact protection. ARC NVE industrial coating is designed to:
- Replace acid resistant tiles or overlayments of phenolic, furan, polyester, or concrete
- Protect against concentrated acids, organic and inorganic acids, solvents, and alkalis
- Easily apply by trowel
Metallprodukter:
ARC 855
Brush & Roll Grade, Chemically-Resistant Coating with Moderate Ceramic Reinforcement
100% solids, ceramic reinforced, thin film coating to protect metal against chemicals and corrosion. ARC 855 industrial coating is designed to:
- Upgrade new and old equipment exposed to corrosion or chemical attack
- Replace traditional coatings, special alloys, engineered plastics, ceramics, etc.
- Apply easily by roller or brush
ARC 858
Abrasion Resistant Rebuilding and Faring Composite
100% solids, thick film, ceramic reinforced abrasion control epoxy compound formulated to protect metal surfaces subjected to erosion, corrosion, and chemical attack. ARC 858 industrial coating is designed to:
- Upgrade new and old equipment exposed to abrasion, corrosion, or chemical attack
- Rebuild surfaces with erosion resistant protection outperforming weld overlays
- Fill grooves, pits, etc. in metal prior to overcoating with another ARC product
- Easily apply by trowel
ARC BX1
Trowel-Grade Coating for Coarse-Particle, Severe-Sliding Wear
100% solids, modified epoxy formulation, reinforced with a proprietary blend of ceramic beads and powders for severely abrasive, sliding wear environments.
ARC BX1 industrial wear resistant coating is designed to:
- Protect areas exposed to sliding abrasion
- Resurface damaged metal in lieu of more traditional weld overlays
- Replace ceramic tiles and rubber linings, which can disbond easily
- Easily apply by trowel
ARC 1 BX1
Impact-Resistant and Severely Abrasive Wear-Resistant Epoxy Composite Coating
100% solids, impact resistant, ceramic reinforced, epoxy/urethane hybrid coating for severe abrasive wear and impact resistance.
ARC I BX1 industrial coating is designed to:
ARC I BX1 industrial coating is designed to:
- Protect surfaces exposed to impact <50 ft lb (<68 Nm) and sliding abrasion
- Provide a longer lasting alternative to rubber lining and ceramic tiles
- Resist direct as well as reverse impact forces
- Easily apply by trowel
ARC BX5
Rapid-Curing, Trowel-Grade Coating for Fine-Particle Moderate Sliding Wear
Rapid curing, 100% solids, ceramic reinforced, multi-component system, formulated for moderate sliding-wear and abrasion caused by fine particles.
ARC BX5 industrial coating is designed to:
- Cure under adverse conditions with maximum adhesion
- Quickly patch and repair worn equipment and structures
- Easily apply by trowel
ARC S4+
Brush-Roll-Spray Applied, Severe Chemical-Resistant Coating
100% solids, advanced reinforced thin film coating to protect structures against extreme chemical attack. ARC S4+ industrial coating is designed to:
- Protect against extreme chemical attack in immersion
- Provide extended wear resistance
- Apply by brush, roller, airless, or plural component spraying
ARC S7
High Temperature and Chemical Resistant Novolac Vinyl Ester Coating
A low VOC, novolac vinyl ester based, sprayable protective barrier coating for high temperature, chemical exposures where thermal cycling conditions may be present. ARC S7 industrial coating is designed to:
- Resist thermal cycling conditions up to 180°C (350°F)
- Resist a wide range of inorganic as well as organic acids and hydrocarbon based chemical compounds
- Easily apply by airless spray system
ARC BX2
Trowel-Grade Coating for Fine-Particle, Moderately Abrasive-Sliding Wear
100% solids, modified epoxy formulation, reinforced with a proprietary blend of ceramic beads and powders for fine particle, abrasive sliding wear environments.
ARC BX2 industrial wear-resistant coating is designed to:
- Protect areas exposed to moderate sliding abrasion
- Resurface damaged metal in lieu of more traditional weld overlays
- Replace ceramic tiles and rubber linings which can more easily disbond
- Easily apply by trowel
